1. Use of Vinegar and baking soda -:
One of the most effective methods that you can use to get rid of older stains is the baking soda-vinegar. Use vinegar and baking soda to get rid of old stains in carpet, you will want to mix approximately. Mix one-half cup of each in a gallon of water to get rid of larger stains. Apply a small amount of this solution to stains in your carpet using a clean washcloth. Let it sit for a few minutes, then wipe it off with clean water.
2. Use of Scrub brush -:
Using a scrub brush, scrub the liquid cleaning solution deeply into your carpet, scrubbing vigorously. Pour a vinegar-water solution White vinegar and cold water over the stain to saturated. Next, spray or wipe it down with the one-part white vinegar-one-part water solution. Dampen and wring a clean white cotton towel, then lay it on top of the stain.
3. Method to apply the solution -:
Spray over the area of stain liberally. Let it soak in for 5-10 minutes, then begin to wipe it off with the towel wet with a dry, clean one, until the stain is completely removed. After five minutes, spray water over the stain and wipe it away with a clean towel. Spray a second towel with cold water, then use that to wipe out the soapy solution from the carpet. And blot it again with a dry cloth. Apply enough pressure on the affected fibres of the carpet. So that your clean cloth will absorb a majority of the stains materials.
4. Use of Carpet Clean stain Remover -:
If you still clearly see stains after drying your carpet, apply additional stain removal products and repeat your carpet cleaning process. If simple water does not work, switch to carpet stain removal products or DIY carpet cleaning solutions. Using small amounts of Prevent Carpet Stains with clean rags, paper towels, or sponges is a professional-grade way to eliminate stains. Avoid using hard brushes or scrubbers that are too rough, because that can hurt the fabric of the carpet, spread out the stain, or cause the stain to set in.
5. What to do After applying cleaning Solution -:
Once you have applied the cleaning solution to your stain, allow it to do its magic on its own for at least five minutes before you wash it off, especially with difficult-to-remove stains such as hair dye that has been splattered all over your carpet. Simply spray the stain with salt, leave for several minutes, then brush. Let water and dish soap sit for a few minutes, and then blot out the stain with a clean cloth and fresh water. Apply it on bloodstains using a spray bottle or simply by dumping it onto bloodstains.
6. Water and White Vinegar solution to clean stains -:
Mix 32 ounces of water with ¼ teaspoon white vinegar (or bleach free cleaner) and wipe lightly over the area until you have removed the stains. Vacuum the area prior to the pieces being softened, then use a white towel to wipe down the carpet. All you need to do is repeat this process until all of the fat has been pulled out of the carpet. To eliminate pet stains, use Local carpet cleaners that contain enzymes, which also works to eliminate smell-causing bacteria.
